loading
ZDR5-60
LEYU
| Availability: | |
|---|---|
| Quantity: | |
Model | ZDR5-60-12 | ZDR5-60-24 |
DC Voltage | 12V | 12V |
Rated Current | 5A | 2.5A |
Current Range | 0 ~ 5A | 0 ~ 2.5A |
Rated Power | 60W | 60W |
Voltage Adj. Range | 10.8 ~ 13.8V | 21.6 ~ 29V |
Voltage Tolerance Note.3 | ±2.0% | ±1.0% |
Line Regulation | ±1.0% | ±1.0% |
Load Regulation | ±1.0% | ±1.0% |
Setup, Rise Time | 600ms/230VAC 600ms/115VAC at full load | |
Hold Up Time (Typ.) | 120ms/230VAC 30ms/115VAC at full load | |
Voltage Range | 85 ~ 264VAC (277VAC operational ) 120 ~ 370VDC (390VDC operational ) | |
Frequency Range | 50 ~ 60Hz | |
Efficiency (Typ.) | 82% | 86% |
AC Current (Typ.) | 1.3A/115VAC 0.7A/230VAC | |
Over Load | 105 ~ 160% rated output power | |
Hiccup mode when output voltage <50%, recovers automatically after fault condition is removed | ||
Constant current limiting within 50% ～100% rated output voltage, recovers automatically after fault condition is removed | ||
Over Voltage | 14.2 ~ 16.2V | 18.8 ~ 22.5V |
Protection type : Shut down o/p voltage, re-power on to recover | ||
Working Temp. | -20 ~ +70℃ (Refer to "Derating Curve") | |
Working Humidity | 10% ~ 95% | |
Storage Temp., Humidity | -30 ~ +85℃, 10 ~ 95% RH non-condensing | |
Safety Standards | UL62368-1, UL508, TUV EN61558-2-16, IEC62368-1, EAC TP TC 004, BSMI CNS14336-1 approved; Design refer to EN62368-1 | |
Dimension | 33*111*89mm (W*H*D) | |
Weight | 236g | |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. | ||
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor. | ||
3. Tolerance : includes set up tolerance, line regulation and load regulation. | ||
4. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” | ||
5. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). | ||
English
